Code: 08
Display:
Go: ON
Ready: ON
Attention: ON
Description:
Fatal error
All three LEDs are on continuously in the fatal-error state. Press the GO button to see the secondary error information for the fatal error. When you release the button the printer returns to the initial Fatal-error state.
1 If the ATTENTION light illuminates as the secondary error pattern, the formatter and engine are not communicating.
- Check the ribbon cable between the formatter and ECU, and check all other connections.
- If the error persists, replace the ECU.
- If the error persists, replace the printer.
2 If the GO and READY lights illuminate as the secondary error pattern, the fuser (fixing assembly) has failed and must be replaced
https://printcopy.info/?l=en&mod=erc&br ... Jet%201010